Commercial · Peoria, AZ
A properly built concrete curb and gutter controls runoff, protects asphalt and concrete edges, and keeps parking lots and drive lanes cleaner. Quality Concrete Peoria has served Peoria since 2017, installing formed and machine-slip curb and gutter for homes, HOAs, and commercial sites.
Good curb and gutter starts below grade. We verify layout, line, and flow line elevations, then excavate to firm native soil and proof-roll soft spots. The base is built with compacted ABC (aggregate base course) or road base in lifts, typically 4-6 inches as specified, compacted with a plate compactor or jumping jack to reduce settlement. Forms are staked tight with proper batter, stringlines are checked for straightness and radius work, and we install dowels or keyways where the curb ties into existing slabs and pavement to reduce separation.
Peoria heat and monsoon bursts demand concrete that finishes dense and drains fast. We place air-entrained or non air-entrained mix as required, commonly 3,500-4,000 psi, and control water on site to avoid weak paste and surface dusting. Joints are cut or tooled at proper spacing to manage shrinkage cracking, and we form inlets, returns, and curb ramps to meet site grades. Finishes are selected for function, including broom-finish for traction, smooth steel trowel where specified, and clean radius edges for durability and better appearance along driveways and parking stalls.
Customers choose us because we build to plan and we communicate through every phase. We are licensed and insured, provide clear written estimates, and coordinate with grading, asphalt, landscaping, and striping crews so curb lines, valley gutter, and tie-ins land where they should. Our crews use professional forming systems, laser levels, and concrete vibrators where needed to consolidate around rebar and dowels. The result is curb and gutter that carries water, resists spalling at edges, and looks consistent across long runs, curves, and returns.
Before we leave, we walk the job with you and document slopes, tie-ins, and any punch list items. You get clean joints, consistent reveal, properly tooled edges, and transitions that do not trap water at driveway approaches or low points. We also review curing and protection, including when vehicles can cross, how to avoid early edge damage, and what to expect from normal hairline shrinkage versus movement. If your project needs add-ons like driveway approaches, valley gutter, dumpster pads, or small asphalt repairs at the interface, we can include them in the scope so everything finishes as one system.
Yes, we provide a free written estimate after a quick site visit to confirm measurements, access, base conditions, and any demo needs.
Yes. We handle saw cutting, breakup, loading, and haul-off, then regrade and compact the base before the new pour.
Common options include broom-finish for traction, smooth trowel where appropriate, light texture, and clean edging. We will recommend a finish based on use, slope, and safety.
Yes. We form to the right elevations and use transition planning, isolation joints, and careful edging so new concrete ties in cleanly without creating trip hazards.
Yes. We handle trip-hazard removal, panel replacement, curb and gutter sections, dumpster pads, and other targeted repairs with minimal disruption.
Concrete curb and gutter is more than a border, it is a drainage and edge-control system that protects pavement, keeps water out of landscaped areas, and channels runoff to the right place. Quality Concrete Peoria installs new curb and gutter and replaces damaged sections for residential driveways, HOA streetscapes, and commercial parking lots. Whether you need straight runs, radii, curb returns, valley gutter, or driveway approaches, we focus on correct elevations, solid base, and clean joints so the work performs through heat, traffic, and stormwater.
A long-lasting concrete curb and gutter installation starts with proper excavation and base preparation. We remove failed concrete and unstable subgrade, then rebuild with compacted aggregate base course in lifts. Forms are set to maintain a consistent reveal and the correct gutter pan slope, and we tie into existing slabs or pavement using dowels, keyways, or sawcut edges when appropriate. During placement we consolidate around reinforcement and maintain consistent concrete density along the face and gutter line.
Finishing and curing are where many curb jobs fail. We avoid overwatering, tool edges to reduce chipping, and space control joints to help the concrete crack where it should. Depending on the site, we can match broom-finish texture, smooth finishes for certain details, or meet specs for curb ramps and transitions. After placement, proper curing and protection keeps the surface from drying too fast in hot weather and reduces early surface defects.
If you are dealing with ponding, broken curb corners, or gutter lines that no longer carry water, we can evaluate grades and recommend replacement versus spot repair. You will receive a written scope, clear schedule, and a final walkthrough so you know what was built, how it drains, and when it is ready for traffic. For projects that also need approaches, small slabs, or tie-ins, we can bundle the work so your concrete curb and gutter functions as a complete system.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Peoria. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
